Teldat bintec RT1202 Manual de usuario Pagina 478
- Pagina / 622
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Field Description
Monitored Interface
Only for Event Type !" *3# and !"
(!!"
Select the interface whose defined status shall trigger an opera-
tion.
Interface Status
Only for Event Type !" *3#
Select the status that the interface must have in order to initiate
the intended operation.
Possible values:
• 0) (default value): The function is enabled.
• .1: The interface is disabled.
Traffic Direction
Only for Event Type !" (!!"
Select the direction of the data traffic whose values should be
monitored as initiating an operation.
Possible values:
• @C (default value): Incoming data traffic is monitored.
• (C: Outgoing data traffic is monitored.
Interface Traffic Condi-
tion
Only for Event Type !" (!!"
Select whether the value for data traffic must be
(default value) or /## the value specified in (#
! (!!" in order to initiate the operation.
Transferred Traffic
Only for Event Type !" (!!"
Enter the desired value in kBytes for the data traffic to serve as
comparison.
The default value is .
Destination IP Address
Only for Event Type (#
Enter the IP address whose accessibility is to be checked.
Source IP Address
Only for Event Type (#
21 Local Services Teldat GmbH
464 bintec Rxxx2/RTxxx2
- Reference 1
- Manual Teldat GmbH 2
- Legal Notice 2
- Table of Contents Teldat GmbH 10
- Table of Contents 11
- Chapter 1 Introduction 15
- 1 Introduction Teldat GmbH 16
- 2 bintec Rxxx2/RTxxx2 16
- Chapter 2 About this guide 17
- 4 bintec Rxxx2/RTxxx2 18
- 2 About this guide 19
- Chapter 3 Installation 20
- 3 Installation 21
- 3.2 Cleaning 22
- 3.3 Support information 23
- Chapter 4 Reset 24
- Chapter 5 Technical data 25
- 5 Technical data Teldat GmbH 26
- 12 bintec Rxxx2/RTxxx2 26
- 5.2 General Product Features 27
- 14 bintec Rxxx2/RTxxx2 28
- 5 Technical data 29
- 16 bintec Rxxx2/RTxxx2 30
- 18 bintec Rxxx2/RTxxx2 32
- 20 bintec Rxxx2/RTxxx2 34
- 22 bintec Rxxx2/RTxxx2 36
- 5.3 LEDs 37
- 24 bintec Rxxx2/RTxxx2 38
- 5.4 Connectors 39
- 26 bintec Rxxx2/RTxxx2 40
- 28 bintec Rxxx2/RTxxx2 42
- 5.5 Pin Assignments 43
- 5.5.3 ADSL interface 44
- 5.5.4 SHDSL interface 45
- 5.5.5 VDSL2 interface 46
- 5.5.6 ISDN-PRI interface 46
- 5.5.7 ISDN BRI interface 47
- 5.5.8 FXS interface 48
- 5.6 WEEE information 50
- 38 bintec Rxxx2/RTxxx2 52
- 40 bintec Rxxx2/RTxxx2 54
- Chapter 7 Basic configuration 55
- 7.2 System requirements 56
- 7.3 Preparation 56
- Basic configuration 57
- Internet access over ADSL 57
- 7 Basic configuration 57
- 7.3.2 Configuring a PC 58
- 7.4 Modify system password 59
- 46 bintec Rxxx2/RTxxx2 60
- 7.6 Software Update 61
- 48 bintec Rxxx2/RTxxx2 62
- 8.1 Access Options 63
- 8.1.1.2 Telnet 64
- 8.1.1.3 SSH 64
- 50 bintec Rxxx2/RTxxx2 64
- 8 Access and configuration 65
- 52 bintec Rxxx2/RTxxx2 66
- 8.2 Login 68
- 8.3 Configuration options 70
- 8.3.1.1 Call up the GUI 72
- 8.3.1.2 Operating elements 72
- 58 bintec Rxxx2/RTxxx2 72
- 60 bintec Rxxx2/RTxxx2 74
- 62 bintec Rxxx2/RTxxx2 76
- 64 bintec Rxxx2/RTxxx2 78
- 8.4 BOOTmonitor 80
- 68 bintec Rxxx2/RTxxx2 82
- Chapter 9 Assistants 83
- Chapter 10 System Management 84
- 72 bintec Rxxx2/RTxxx2 86
- 10.2 Global Settings 87
- 74 bintec Rxxx2/RTxxx2 88
- 10.2.2 Passwords 89
- 76 bintec Rxxx2/RTxxx2 90
- 10.2.3 Date and Time 91
- ISDN/Manual 92
- Time server 92
- 78 bintec Rxxx2/RTxxx2 92
- 80 bintec Rxxx2/RTxxx2 94
- 10.2.4 System Licences 96
- 10.2.4.1 Edit or New 97
- Routing versus bridging 98
- 10.3.1 Interfaces 100
- 10.3.1.1 Add 101
- Teldat GmbH 101
- 10 System Management 101
- 88 bintec Rxxx2/RTxxx2 102
- 10.4 Administrative Access 103
- 90 bintec Rxxx2/RTxxx2 104
- 10.4.1.1 Add 104
- 10.4.2 SSH 105
- 92 bintec Rxxx2/RTxxx2 106
- 94 bintec Rxxx2/RTxxx2 108
- 10.4.3 SNMP 109
- 10.5 Remote Authentication 110
- RADIUS packets 111
- 10.5.1.1 Edit or New 112
- 98 bintec Rxxx2/RTxxx2 112
- 100 bintec Rxxx2/RTxxx2 114
- 10.5.2 TACACS+ 116
- 104 bintec Rxxx2/RTxxx2 118
- 10.5.3 Options 119
- 10.6 Certificates 120
- 10.6.1 Certificate List 121
- 108 bintec Rxxx2/RTxxx2 122
- 10.6.1.2 Certificate Request 124
- 110 bintec Rxxx2/RTxxx2 124
- 112 bintec Rxxx2/RTxxx2 126
- 114 bintec Rxxx2/RTxxx2 128
- 10.6.1.3 Import 129
- 10.6.2 CRLs 130
- 10.6.2.1 Import 131
- 10.6.3 Certificate Servers 132
- 11.1 AUX 133
- 120 bintec Rxxx2/RTxxx2 134
- 11 Physical Interfaces 135
- 11.2 Ethernet Ports 136
- VLANs for Routing Interfaces 137
- 11.2.1 Port Configuration 137
- 124 bintec Rxxx2/RTxxx2 138
- 11.3 ISDN Ports 139
- 126 bintec Rxxx2/RTxxx2 140
- 128 bintec Rxxx2/RTxxx2 142
- 130 bintec Rxxx2/RTxxx2 144
- 132 bintec Rxxx2/RTxxx2 146
- 11.3.2 MSN Configuration 148
- 11.3.2.1 New 149
- 136 bintec Rxxx2/RTxxx2 150
- 11.4 DSL Modem 151
- 138 bintec Rxxx2/RTxxx2 152
- 140 bintec Rxxx2/RTxxx2 154
- 11.5 SHDSL 155
- 142 bintec Rxxx2/RTxxx2 156
- 144 bintec Rxxx2/RTxxx2 158
- Chapter 12 LAN 159
- Example of subnets 160
- 12.1.1.1 Edit or New 160
- 12 LAN Teldat GmbH 160
- 146 bintec Rxxx2/RTxxx2 160
- 148 bintec Rxxx2/RTxxx2 162
- 12.2 VLAN 163
- 150 bintec Rxxx2/RTxxx2 164
- 12.2.1 VLANs 165
- 12.2.2 Port Configuration 166
- 12.2.3 Administration 166
- 13.1 Wizard 168
- 13.1.1 Basic Settings 169
- 13.1.2 Radio Profile 170
- 13.1.3 Wireless Network 170
- 13 Wireless LAN Controller 171
- 158 bintec Rxxx2/RTxxx2 172
- 13.2 Controller Configuration 174
- 13.3 Slave AP configuration 176
- 13.3.1 Slave Access Points 177
- 13.3.1.1 Edit 178
- 164 bintec Rxxx2/RTxxx2 178
- 166 bintec Rxxx2/RTxxx2 180
- 13.3.2 Radio Profiles 181
- 168 bintec Rxxx2/RTxxx2 182
- 170 bintec Rxxx2/RTxxx2 184
- 172 bintec Rxxx2/RTxxx2 186
- 13.3.3.1 Edit or New 188
- 174 bintec Rxxx2/RTxxx2 188
- 176 bintec Rxxx2/RTxxx2 190
- 178 bintec Rxxx2/RTxxx2 192
- 180 bintec Rxxx2/RTxxx2 194
- 13.4 Monitoring 195
- 13.4.3 Load Balancing 196
- 13.4.4 Neighbor APs 197
- 13.4.5 Rogue APs 198
- 13.4.6 Rogue Clients 199
- 13.5 Maintenance 200
- 188 bintec Rxxx2/RTxxx2 202
- Chapter 14 Networking 203
- 14 Networking Teldat GmbH 204
- 190 bintec Rxxx2/RTxxx2 204
- 14 Networking 205
- 192 bintec Rxxx2/RTxxx2 206
- 194 bintec Rxxx2/RTxxx2 208
- 14.1.2 IPv4 Routing Table 209
- 14.1.3 Options 210
- 14.2 NAT 211
- 198 bintec Rxxx2/RTxxx2 212
- 14.2.2 NAT Configuration 213
- 200 bintec Rxxx2/RTxxx2 214
- 202 bintec Rxxx2/RTxxx2 216
- 204 bintec Rxxx2/RTxxx2 218
- 14.3 Load Balancing 219
- 206 bintec Rxxx2/RTxxx2 220
- 208 bintec Rxxx2/RTxxx2 222
- 14.3.2.1 Edit or New 224
- 210 bintec Rxxx2/RTxxx2 224
- 212 bintec Rxxx2/RTxxx2 226
- 14.4 QoS 227
- 214 bintec Rxxx2/RTxxx2 228
- 14.4.2 QoS Classification 230
- 218 bintec Rxxx2/RTxxx2 232
- 14.4.3.1 New 234
- 220 bintec Rxxx2/RTxxx2 234
- 222 bintec Rxxx2/RTxxx2 236
- 224 bintec Rxxx2/RTxxx2 238
- 14.5 Access Rules 240
- 14.5.1 Access Filter 242
- 230 bintec Rxxx2/RTxxx2 244
- 14.5.2 Rule Chains 246
- 14.5.3 Interface Assignment 247
- 14.5.3.1 Edit or New 248
- 234 bintec Rxxx2/RTxxx2 248
- 14.6 Drop In 249
- 236 bintec Rxxx2/RTxxx2 250
- 238 bintec Rxxx2/RTxxx2 252
- Chapter 15 Routing Protocols 253
- 240 bintec Rxxx2/RTxxx2 254
- 15.1.2 RIP Filter 255
- 15.1.2.1 New 256
- 242 bintec Rxxx2/RTxxx2 256
- 15 Routing Protocols 257
- 15.1.3 RIP Options 258
- 15.2 OSPF 260
- 15.2.1 Areas 262
- 15.2.2 Interfaces 264
- 15.2.3 Global Settings 266
- Chapter 16 Multicast 268
- 16.1 General 269
- 16.2 IGMP 270
- 16.2.1 IGMP 271
- 16 Multicast Teldat GmbH 272
- 258 bintec Rxxx2/RTxxx2 272
- 16.2.2 Options 273
- 260 bintec Rxxx2/RTxxx2 274
- 16.3 Forwarding 275
- 16.4 PIM 276
- 16.4.1.1 Edit or New 277
- 16 Multicast 277
- 264 bintec Rxxx2/RTxxx2 278
- 16.4.2 PIM Rendezvous Points 280
- 16.4.3 PIM Options 281
- 268 bintec Rxxx2/RTxxx2 282
- Chapter 17 WAN 283
- Default Route 284
- Activating NAT 284
- Connection Idle Timeout 284
- Authentication 284
- Callback 285
- Channel Bundling 285
- 17.1.1 PPPoE 285
- 17.1.1.1 New 286
- 17 WAN Teldat GmbH 286
- 272 bintec Rxxx2/RTxxx2 286
- 274 bintec Rxxx2/RTxxx2 288
- 276 bintec Rxxx2/RTxxx2 290
- 17.1.2 PPTP 291
- 278 bintec Rxxx2/RTxxx2 292
- 280 bintec Rxxx2/RTxxx2 294
- 17.1.3 PPPoA 296
- 284 bintec Rxxx2/RTxxx2 298
- 17.1.4 ISDN 300
- 17.1.4.1 New 301
- 288 bintec Rxxx2/RTxxx2 302
- 290 bintec Rxxx2/RTxxx2 304
- 292 bintec Rxxx2/RTxxx2 306
- 294 bintec Rxxx2/RTxxx2 308
- 17.1.5 AUX 309
- 17.1.5.1 New 310
- 296 bintec Rxxx2/RTxxx2 310
- 298 bintec Rxxx2/RTxxx2 312
- 300 bintec Rxxx2/RTxxx2 314
- 17.1.6 IP Pools 316
- 17.2 ATM 317
- 17.2.1 Profiles 318
- 306 bintec Rxxx2/RTxxx2 320
- 308 bintec Rxxx2/RTxxx2 322
- 17.2.2 Service Categories 323
- 310 bintec Rxxx2/RTxxx2 324
- 17.2.3 OAM Controlling 325
- 17.2.3.1 New 326
- 312 bintec Rxxx2/RTxxx2 326
- 314 bintec Rxxx2/RTxxx2 328
- 17.3 Leased Line 329
- 17.3.1 Interfaces 330
- 17.3.1.1 Edit 331
- 318 bintec Rxxx2/RTxxx2 332
- 320 bintec Rxxx2/RTxxx2 334
- 17.4 Real Time Jitter Control 336
- Chapter 18 VPN 338
- 18.1.1 IPSec Peers 339
- Peer Monitoring 340
- 18.1.1.1 New 340
- 18 VPN Teldat GmbH 340
- 326 bintec Rxxx2/RTxxx2 340
- 328 bintec Rxxx2/RTxxx2 342
- 330 bintec Rxxx2/RTxxx2 344
- 332 bintec Rxxx2/RTxxx2 346
- 334 bintec Rxxx2/RTxxx2 348
- 336 bintec Rxxx2/RTxxx2 350
- 338 bintec Rxxx2/RTxxx2 352
- 340 bintec Rxxx2/RTxxx2 354
- 18.1.2 Phase-1 Profiles 355
- 342 bintec Rxxx2/RTxxx2 356
- 344 bintec Rxxx2/RTxxx2 358
- 346 bintec Rxxx2/RTxxx2 360
- 348 bintec Rxxx2/RTxxx2 362
- 18.1.3 Phase-2 Profiles 363
- 350 bintec Rxxx2/RTxxx2 364
- 352 bintec Rxxx2/RTxxx2 366
- 18.1.4 XAUTH Profiles 368
- 18.1.5 IP Pools 370
- 18.1.6 Options 371
- 358 bintec Rxxx2/RTxxx2 372
- 18.2 L2TP 374
- 18.2.1 Tunnel Profiles 375
- 362 bintec Rxxx2/RTxxx2 376
- 18.2.2 Users 378
- 366 bintec Rxxx2/RTxxx2 380
- 368 bintec Rxxx2/RTxxx2 382
- 18.2.3 Options 384
- 18.3 PPTP 385
- 18.3.1.1 New 386
- 372 bintec Rxxx2/RTxxx2 386
- 374 bintec Rxxx2/RTxxx2 388
- 376 bintec Rxxx2/RTxxx2 390
- 18.3.2 Options 392
- 18.3.3 IP Pools 393
- 18.4 GRE 394
- 18.4.1 GRE Tunnels 395
- 382 bintec Rxxx2/RTxxx2 396
- Chapter 19 Firewall 397
- IP Access Lists 398
- 19.1 Policies 398
- 19.1.1.1 New 399
- 19 Firewall 399
- 19 Firewall Teldat GmbH 400
- 386 bintec Rxxx2/RTxxx2 400
- 19.1.2 QoS 402
- 19.1.3 Options 403
- 390 bintec Rxxx2/RTxxx2 404
- 19.2 Interfaces 405
- 19.3 Addresses 406
- 19.3.2 Groups 407
- 19.4 Services 408
- 19.4.2 Groups 410
- Chapter 20 VoIP 412
- 20.1.1.1 Edit or New 413
- 20.1.2 SIP Endpoints 414
- 20.2 Media Gateway 416
- 20.2.1 Extensions 417
- 20 VoIP Teldat GmbH 418
- 404 bintec Rxxx2/RTxxx2 418
- 406 bintec Rxxx2/RTxxx2 420
- 20.2.2 SIP Accounts 422
- 20.2.2.1 Edit or New 423
- 410 bintec Rxxx2/RTxxx2 424
- 412 bintec Rxxx2/RTxxx2 426
- 414 bintec Rxxx2/RTxxx2 428
- 20.2.3 Call Routing 429
- 416 bintec Rxxx2/RTxxx2 430
- 418 bintec Rxxx2/RTxxx2 432
- 20.2.4 CLID Translation 433
- 420 bintec Rxxx2/RTxxx2 434
- 20.2.5 Call Translation 435
- 422 bintec Rxxx2/RTxxx2 436
- 20.2.6 ISDN Trunks 437
- 20.2.7 Options 438
- 426 bintec Rxxx2/RTxxx2 440
- 20.3 RTSP 441
- 20.3.1 RTSP Proxy 442
- Chapter 21 Local Services 443
- 21 Local Services Teldat GmbH 444
- 430 bintec Rxxx2/RTxxx2 444
- 21.1.1 Global Settings 445
- 432 bintec Rxxx2/RTxxx2 446
- 21.1.2 DNS Servers 447
- 434 bintec Rxxx2/RTxxx2 448
- 21.1.3 Static Hosts 449
- 21.1.4 Domain Forwarding 450
- 21.1.4.1 New 451
- 21 Local Services 451
- 21.1.5 Cache 452
- 21.1.6 Statistics 453
- 21.2 HTTPS 454
- 21.3 DynDNS Client 455
- 442 bintec Rxxx2/RTxxx2 456
- 21.3.2 DynDNS Provider 457
- 444 bintec Rxxx2/RTxxx2 458
- 21.4 DHCP Server 459
- 21.4.2 DHCP Configuration 460
- 21.4.2.1 Edit or New 461
- 448 bintec Rxxx2/RTxxx2 462
- 21.4.3 IP/MAC Binding 464
- 21.4.4 DHCP Relay Settings 465
- 21.5 Web Filter 466
- 21.5.1 General 467
- 454 bintec Rxxx2/RTxxx2 468
- 21.5.2 Filter List 469
- 456 bintec Rxxx2/RTxxx2 470
- 21.5.3 Black / White List 471
- 21.6 CAPI Server 472
- 21.6.1.1 New 473
- 21.7 Scheduling 474
- 21.7.1 Trigger 475
- 462 bintec Rxxx2/RTxxx2 476
- 464 bintec Rxxx2/RTxxx2 478
- 466 bintec Rxxx2/RTxxx2 480
- 21.7.2 Actions 481
- 468 bintec Rxxx2/RTxxx2 482
- 470 bintec Rxxx2/RTxxx2 484
- 472 bintec Rxxx2/RTxxx2 486
- 474 bintec Rxxx2/RTxxx2 488
- 476 bintec Rxxx2/RTxxx2 490
- 21.7.3 Options 491
- 21.8 Surveillance 492
- 480 bintec Rxxx2/RTxxx2 494
- 21.8.2 Interfaces 495
- 21.8.3 Temperature 496
- 21.8.3.1 Edit or New 497
- 21.8.4 Ping Generator 498
- 21.9 ISDN Theft Protection 499
- 486 bintec Rxxx2/RTxxx2 500
- 21.10 UPnP 501
- 21.10.1 Interfaces 502
- 21.10.2 General 503
- 21.11 HotSpot Gateway 504
- 21.11.1 HotSpot Gateway 505
- 21.11.1.1 Edit or New 506
- 492 bintec Rxxx2/RTxxx2 506
- 494 bintec Rxxx2/RTxxx2 508
- 21.11.2 Options 509
- 21.12 BRRP 510
- 21.12.1 Virtual Routers 511
- 498 bintec Rxxx2/RTxxx2 512
- 21.12.1.1 New 513
- 500 bintec Rxxx2/RTxxx2 514
- 502 bintec Rxxx2/RTxxx2 516
- 21.12.2 VR Synchronisation 517
- 21.12.3 Options 518
- Chapter 22 Maintenance 520
- 22.1.2 DNS Test 521
- 22.1.3 Traceroute Test 521
- 22.2.1 Options 522
- Configuration file format 523
- 22 Maintenance 523
- 22 Maintenance Teldat GmbH 524
- 510 bintec Rxxx2/RTxxx2 524
- 512 bintec Rxxx2/RTxxx2 526
- 22.3 Reboot 528
- Chapter 23 External Reporting 529
- 23.1.1.1 New 530
- 516 bintec Rxxx2/RTxxx2 530
- 23 External Reporting 531
- 23.2 IP Accounting 532
- 23.3 Alert Service 534
- 522 bintec Rxxx2/RTxxx2 536
- 23.3.2 Alert Settings 537
- 524 bintec Rxxx2/RTxxx2 538
- 23.4 SNMP 539
- 23.4.2 SNMP Trap Hosts 540
- 23.5 Activity Monitor 541
- 23.5.1 Options 542
- Chapter 24 Monitoring 544
- 24.2 IPSec 545
- 24 Monitoring Teldat GmbH 546
- 532 bintec Rxxx2/RTxxx2 546
- 24.2.2 IPSec Statistics 547
- 24.3 ISDN/Modem 548
- 24.3.2 Call History 549
- 24.4 Interfaces 550
- 24 Monitoring 551
- 538 bintec Rxxx2/RTxxx2 552
- 24.5 Bridges 553
- 24.6 HotSpot Gateway 553
- 24.7 QoS 554
- 24.8 OSPF 555
- 542 bintec Rxxx2/RTxxx2 556
- 24.8.2 Statistics 557
- 544 bintec Rxxx2/RTxxx2 558
- 24.9 PIM 559
- 546 bintec Rxxx2/RTxxx2 560
- 548 bintec Rxxx2/RTxxx2 562
- 550 bintec Rxxx2/RTxxx2 564
- 552 bintec Rxxx2/RTxxx2 566
- Glossary 567
- Glossary Teldat GmbH 568
- 554 bintec Rxxx2/RTxxx2 568
- 556 bintec Rxxx2/RTxxx2 570
- 558 bintec Rxxx2/RTxxx2 572
- 560 bintec Rxxx2/RTxxx2 574
- 562 bintec Rxxx2/RTxxx2 576
- 564 bintec Rxxx2/RTxxx2 578
- 566 bintec Rxxx2/RTxxx2 580
- 568 bintec Rxxx2/RTxxx2 582
- 570 bintec Rxxx2/RTxxx2 584
- 572 bintec Rxxx2/RTxxx2 586
- 574 bintec Rxxx2/RTxxx2 588
- 576 bintec Rxxx2/RTxxx2 590
- 578 bintec Rxxx2/RTxxx2 592
- 580 bintec Rxxx2/RTxxx2 594
- 582 bintec Rxxx2/RTxxx2 596
- 584 bintec Rxxx2/RTxxx2 598
- 586 bintec Rxxx2/RTxxx2 600
- 588 bintec Rxxx2/RTxxx2 602
- 590 bintec Rxxx2/RTxxx2 604
- 592 bintec Rxxx2/RTxxx2 606
- Index Teldat GmbH 608
- 594 bintec Rxxx2/RTxxx2 608
- 596 bintec Rxxx2/RTxxx2 610
- 598 bintec Rxxx2/RTxxx2 612
- 600 bintec Rxxx2/RTxxx2 614
- 602 bintec Rxxx2/RTxxx2 616
- 604 bintec Rxxx2/RTxxx2 618
- 606 bintec Rxxx2/RTxxx2 620
- 608 bintec Rxxx2/RTxxx2 622
© 2020, manymanuals.es. Todos los derechos reservados | 0.021 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales